The image displayed here is only for Reference. In the newer version of USRP E310 audio port is not available

The USRP E310 offers a portable stand-alone software defined radio platform designed for field deployment. The flexible 2×2 MIMO AD9361 transceiver from Analog Devices provides up to 56 MHz of instantaneous bandwidth and spans frequencies from 70 MHz – 6 GHz to cover multiple bands of interest. RF filter banks in both the transmitter and receiver front-end enhances selectivity.

The baseband processor uses the Xilinx Zynq 7020 SoC to deliver FPGA accelerated computations combined with stand-alone operation enabled by a dual-core ARM CPU. The USRP E310 includes a rich set of peripherals such as an integrated GPS receiver for position awareness and time synchronization, as well as two host USB ports for extending storage, I/O, and communication options with off-the-shelf devices. Users can rapidly prototype and deploy designs for mobile and embedded applications with tight size, weight, and power requirements.

The USRP Embedded Series platform uses the OpenEmbedded framework to create custom Linux distributions tailored to application specific needs. The default operating system is pre-installed with the UHD software API and a variety of third party development tools such as GNU Radio. Support for the RFNoC FPGA development framework enables deterministic computations for real-time and wideband signal processing.

OEM configurations are available with reduced size and weight. These configurations may be subject to minimum order quantities. We stock a recommended partial-enclosure configuration. Please contact our sales team for further information:

Operating System

OpenEmbedded Linux (Pre-Imaged)

Development Frameworks

UHD (Pre-Installed)

GNU Radio (Pre-Installed)

Xilinx Vivado 2015.2 Design Suite

Table 1: Operating system and development frameworks

USRP E310 Architecture:

USRP E310 Block Diagram

Click on image to enlarge

Filter Banks

The USRP E310 contains both RX and TX filter banks. Filters are dynamically chosen based on user frequency selection. The RX filters reduce interference from out-of-band signals, while the TX filters suppress harmonics.

USRP E310 RX Filter Bank

– Normalized values based on component characteristics, actual results may vary –

USRP E310 TX Filter Bank


Product Photos

E310 Kit Content

E310 Kit Content

E310 Front Diagonal

USRP E310 Front Diagonal View

E310 Rear Diagonal

USRP E310 Rear Diagonal View

E310 Front

USRP E310 Front View

E310 Rear View

USRP E310 Rear View

N210 E310 Comparison

USRP N210 and E310 Size Comparison



SKU: 783773-01 Category:



  • Wide frequency range: 70 MHz – 6 GHz
  • Up to 56 MHz of instantaneous bandwidth
  • 2×2 MIMO transceiver
  • RX, TX filter banks
  • Xilinx Zynq 7020 SoC: 7 Series FPGA with ARM Cortex A9 866 MHz dual-core processor
  • Up to 10 MS/s sample data transfer rate to ARM processor
  • Synchronization with PPS time reference
  • Integrated GPS receiver
  • 9-axis inertial measurement unit
  • Rich set of peripherals such as host USB and 1 Gigabit Ethernet
  • 133 x 68.2 x 26.4 mm form factor
  • OpenEmbedded build framework
  • USRP Hardware Driver™ (UHD) open-source software API version 3.8.0 or later
  • RF Network on Chip (RFNoC™) FPGA development framework
  • GNU Radio support maintained by Ettus Research™ through GR-UHD, an interface to UHD distributed by GNU Radio


E310 Data Sheet

Included in This Kit:

  • USRP E310
  • Power supply
  • 2x SMB-to-SMA adapter
  • 1 Gigabit Ethernet cable
  • USB2-to-microUSB cable
  • Imaged microSD card
  • Getting started guide

Additional Resources:





There are no reviews yet.

Be the first to review “USRP E310”

Your email address will not be published. Required fields are marked *