The image displayed here is only for Reference. In the newer version of USRP E312 audio port is not available

The battery operated USRP E312 offers a portable stand-alone software defined radio platform designed for field deployment. The flexible 2×2 MIMO AD9361 transceiver from Analog Devices provides up to 56 MHz of instantaneous bandwidth and spans frequencies from 70 MHz – 6 GHz to cover multiple bands of interest. RF filter banks in both the transmitter and receiver front-end enhances selectivity.

The baseband processor uses the Xilinx Zynq 7020 SoC to deliver FPGA accelerated computations combined with stand-alone operation enabled by a dual-core ARM CPU. The USRP E312 includes a rich set of peripherals such as an integrated GPS receiver for position awareness and time synchronization, as well as two host USB ports for extending storage, I/O, and communication options with off-the-shelf devices. Users can rapidly prototype and deploy designs for mobile and embedded applications with tight size, weight, and power requirements.

The USRP Embedded Series platform uses the OpenEmbedded framework to create custom Linux distributions tailored to application specific needs. The default operating system is pre-installed with the UHD software API and a variety of third party development tools such as GNU Radio. Support for the RFNoC FPGA development framework enables deterministic computations for real-time and wideband signal processing.

Operating System

OpenEmbedded Linux (Pre-Imaged)

Development Frameworks

UHD (Pre-Installed)

GNU Radio (Pre-Installed)

Xilinx Vivado 2015.2 Design Suite

Table 1: Operating system and development frameworks

USRP E312 Architecture:

USRP E312 Block Diagram

Click on image to enlarge

Filter Banks

The USRP E312 contains both RX and TX filter banks. Filters are dynamically chosen based on user frequency selection. The RX filters reduce interference from out-of-band signals, while the TX filters suppress harmonics.

USRP E312 RX Filter Bank

– Normalized values based on component characteristics, actual results may vary –

USRP E312 TX Filter Bank


Product Photos

E312 Kit Content

E312 Kit Content

E312 Front Diagonal

USRP E312 Front Diagonal View

E312 Rear Diagonal

USRP E312 Rear Diagonal View

E312 Front

USRP E312 Front View

E312 Rear View

USRP E312 Rear View

E310 E312 Comparison

USRP E310 and E312 Size Comparison

N210 E312 Comparison

USRP N210 and E312 Size Comparison

SKU: 784421-01 Category:



  • Battery operated
  • Wide frequency range: 70 MHz – 6 GHz
  • Up to 56 MHz of instantaneous bandwidth
  • 2×2 MIMO transceiver
  • RX, TX filter banks
  • Xilinx Zynq 7020 SoC: 7 Series FPGA with ARM Cortex A9 866 MHz dual-core processor
  • Up to 10 MS/s sample data transfer rate to ARM processor
  • Synchronization with PPS time reference
  • Integrated GPS receiver
  • 9-axis inertial measurement unit
  • Rich set of peripherals such as host USB and 1 Gigabit Ethernet
  • 133 x 68.2 x 31.8 mm form factor
  • OpenEmbedded build framework
  • USRP Hardware Driver™ (UHD) open-source software API version 3.9.2 or later
  • RF Network on Chip (RFNoC™) FPGA development framework
  • GNU Radio support maintained by Ettus Research™ through GR-UHD, an interface to UHD distributed by GNU Radio

Included in This Kit:

  • USRP E312
  • Power supply
  • 2x SMB-to-SMA adapter
  • 1 Gigabit Ethernet cable
  • USB2-to-microUSB cable
  • Imaged microSD card
  • Getting started guide

Additional Resources:






There are no reviews yet.

Be the first to review “USRP E312”

Your email address will not be published. Required fields are marked *